• street light 6022 1
  • street light 6022 back 1

LED STREET LIGHTING BL6022

Model No:BL6022  50w–200w
Lighting Efficiency:120lm/w
Weight:3.0 kgs
Size:664×243×96mm
Request A Quick Quote

Features of LED street lighting fixture BL6022

led street lighting

led street lighting

  • LED Source:Use well-known LED chips, with multiple low power LED integrated modules, and Wide light-emitting surface, uniform illumination and long lifespan.
  • Housing:Die-cast aluminum, Modern design with strong tempered -glass cover or PC Lens
  • Advantages:With PC lens, mild light, high light effect, quick start, radiation free.
  • Application:City streets, pavements, squares, schools, parks, yards, residential areas, factories and any other places where lighting is needed.
  • Energy efficient:This efficient solution lowers 50% energy consumption compared to traditional lighting fixtures.
  • Super Long lifespan:More than 50,000hrs
  • Good for health: No ultraviolet rays and infrared radiation;, no radiation, Gloss stability. without affecting color life by years.
  • Environment friendly: not harmful elements such as mercury and lead.
  • Eyesight Protection:DC Drives,No Flicker,No eye fatigue with long-term using.
  • Common luminaries usually use AC drives, Flicker follows.
  • High light effect:Entire lighting efficiency≥100lm/W
  • High Protection Class:IP65
  •  1>Meet the requirements of 1:3.5 between the Pole Height and the spacing.
  • 2> Adapt any angles of pole between 0~20°
  •  3> Housing as the heat sink to improve the heat radiation and power performance
  •  4> Convenient to replace with the separated LED box and E-box
led street light

led street light

Installation of LED roadway lighting

Fix the LED street light on the pole first. Connect right the out-going wire of street lights according to the requirements. After check everything is ready, connect to the powerful supply. Then the LED street light can work properly. The installation steps as follow:

Fix pole connector with allocated rotary connector. Put the cable line inside the electric box of light. Fix the light completely on the pole.

Connect the light cable line with power supply according the connecting marks.

AC Input Connecting Mark:NL

N:Zero Line E:Earth Line L:Live Line

 Warning

1.Before installing the LED roadway lighting, please make sure the light is complete

2.Not to press or throw the lamp hard

3.The light should be kept in the place that is cool, dry and clean. Do not expose to extreme elements, such as fire and water.

4.Make sure the installation is correct then connect the power supply. Pay attention to close the power supply when installing the

light.

5.Non-professionals opening light housing is forbidden when the LED roadway lighting is working.

6.Do not throw the used lights indiscriminately. Observe proper recycling procedures.

Product model: BL6022-50W

Lighting Efficiency: 120lm/w

Luminous Flux: 6000lm

Power Factor: ≥0.9

Input Voltage: AC100 ~ 240V

Color Rendering Index: Ra70

Color Temperature 3000/4000/5000/5700K

IP Rating: IP65

Electric Safety Class: CLASS I

Ambient Temperature: -40 ~ 50℃

Pole Connector Size: φ60/φ50mm

Body Weight: 4.5kgs

Product Size: 664×243×96mm

Product model: BL6022-100W

Lighting Efficiency: 120lm/w

Luminous Flux: 12000lm

Power Factor: ≥0.9

Input Voltage: AC100 ~ 240V

Color Rendering Index: Ra70

Color Temperature 3000/4000/5000/5700K

IP Rating: IP65

Electric Safety Class: CLASS I

Ambient Temperature: -40 ~ 50℃

Pole Connector Size: φ60/φ50mm

Body Weight: 6kgs

Product Size: 719×297×96mm

Product model: BL6022-150W

Lighting Efficiency: 120lm/w

Luminous Flux: 18000lm

Power Factor: ≥0.9

Input Voltage: AC100 ~ 240V

Color Rendering Index: Ra70

Color Temperature 3000/4000/5000/5700K

IP Rating: IP65

Electric Safety Class: CLASS I

Ambient Temperature: -40 ~ 50℃

Pole Connector Size: φ60/φ50mm

Body Weight: 6kgs

Product Size: 719×297×96mm

Product model: BL6022-200W

Lighting Efficiency: 120lm/w

Luminous Flux: 24000lm

Power Factor: ≥0.9

Input Voltage: AC100 ~ 240V

Color Rendering Index: Ra70

Color Temperature 3000/4000/5000/5700K

IP Rating: IP65

Electric Safety Class: CLASS I

Ambient Temperature: -40 ~ 50℃

Pole Connector Size: φ60/φ50mm

Body Weight: 8kgs

Product Size: 829×343×101mm




    Full Installation Support

    led street light

    Email Support

    led street light

    Picture Support

    led street light

    Video Support

    Listen To What Our Clients Say About Our LED Street Lights

    head portrait1

    The street lights are very bright and light up a large area have them hooked up to dusk to dawn and work very well.

    head portrait2

    This solar street light exceeded all expectations for the price. Installed in January when the days are short and the nights are long. Even on overcast days the solar panel will top the battery off. Automatically comes on at dusk and goes off at sunrise.

    Ask for A Quick Quote